![]() Using internal soundcards/mixers such as voicemeeter banana *did not work for me*, I ended up with having no sound in OBS. Select these channels in the Windows sound settings as described above in order to monitor the audio signal through headphones.Hi, I just encountered the same issues with my Traktor S2 MK3 and Traktor Pro 3 setup. The list below shows the channels used by the headphone output of each NI audio interface. Click Apply to confirm your settings and close the window with OK.Click Set Default in order to set the selected output as your default system audio output. ![]() In our example we are choosing Output 1/2 of the Komplete Audio 6 MK2: In the Sound > Playback tab, select your interface's output channel you want to use as system output.Click Sound Control Panel on the right:.Select the output channel you want to use as system output. Note: If your sound card has multiple channels, they will appear separately in the output device list. In our example, we select Output 1/2 of the Komplete Audio 6 MK2: In the Sound / Output section, choose your output device from the drop-down menu.Click on the Windows symbol in the bottom left corner of your screen, type in ' sound settings' and press ENTER.Note: If running Windows 7 / 8, use the PDF file attached at the end of this article in conjunction with this guide. as described above in order to monitor your audio signal through your headphones. Select these channels in Configure Speakers. Click Apply and then Done to save the output routing configuration.In the below example, we are selecting Main Left and Main Right for the TRAKTOR AUDIO 10 audio interface. Click on the drop-down field below Left front and Right front to select the left and right output channels for your system output.The configuration menu will vary depending on the model of your audio interface. In the speaker setup menu you can route the system audio output to an individual channel pair (left and right) of your NI audio interface. In the Audio Devices menu, select the name of your soundcard on the left column and then click on the Output tab.Make sure the Audio window is enabled by selecting Window > Show Audio Devices (OS X 10.9 or lower: Window > Show Audio Window) from the menu bar.Open a Finder window and go to Applications > Utilities > Audio MIDI Setup.You can route specific output channels of your audio interface to stream the system audio signal, as explained below. This is normal, as volume is now being controlled by your Native Instruments audio interface. Note: When you select an audio device other than Built-in in the Output tab, the volume bar on the top menu of your Mac is unavailable, as indicated by the message The selected device has no output controls. Now your Mac operating system will output its system audio via a default stereo output channel of your NI audio interface. In the example below, we are defining the Traktor Audio 10, which is currently connected to the system. Select the entry with the name of your audio interface in the Select a device for sound output menu box.Open the Sound menu and select the Output tab.Click on the Apple symbol on the top left corner of your computer screen and choose System Preferences.Make sure your Native Instruments audio interface is connected and recognized.Defining your Audio Interface as System Output
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |